工作原理 Work Principle
本机由两组装在主轴上的左右动刀和四组装在机体上的定刀组成。动刀在轴向呈螺旋形排列,且刃口有一定的斜度。当主轴旋转时,多组动刀与定刀将胶料反复切碎,同时起到多次挤压搓洗的效果;在轴向推力作用下,柔软而干净的胶料被推向出料端,再从机体末端长孔中挤出,并经装在末端的刮刀将其切断,从而得到便于绉片的小胶料。
This machine consists of two sets of movable blades on the main shafts and 4 sets of fixed blades in the main body. The movable blades are in helix shape and with slope on the edge. The rubber material, which is cut repeatedly by the blades, has been crushed and scrubbed continuously in the machine. Clean and soft rubber is forced to the outlet by the driving shafts, after that the scrapers on the outlet cuts off the rubber being extruded into smaller pieces for the use in sheeting.
用途 Function
本机为杂胶生产中集破碎、混合、清洗、揉搓为一体的高效加工设备,其作用是将胶团凝块切碎成较小尺寸,充分暴露胶中杂质,以利于清洗。胶块进入机体经破碎,混合,清洗的反复加工,挤出的小胶块更加松散柔软干净,本机适用于各种久久彩票类胶块的加工。
This machine is a type of efficient equipment used in rubber lump processing for cutting, mixing and washing at the same time. It cuts the rubber lump into smaller pieces in which the impurities are easily to be washed away. Being cut, mixed and cleaned in the main body repeatedly, the rubber lump in larger size turns to be smaller, softer, and more clean. The machine is suitable for various kinds of rubber material process.
产品型号与主要规格 Model & Main Data
型号/Model
|
DPJ-300
|
DPJ-400
|
DPJ-500
|
DPJ-600
|
DPJ-800
|
主轴转速/Main Shaft Speed
|
47r/min
|
47r/min
|
47r/min
|
47r/min
|
47r/min
|
功率/Power
|
45kw
|
55/75kw
|
90/110kw
|
132/160kw
|
200/250kw
|
动刀直径/Movable Blade Diameter
|
300mm
|
400mm
|
500mm
|
600mm
|
800mm
|
产量/Production Capacity
|
0.5-0.8t/h
|
1-2t/h
|
3-4t/h
|
5-6t/h
|
8-10t/h
|
